Six Key Points for Successfully Controlling the Quality of LED Lenses

Monitoring the quality of LED lenses is a headache for all companies, and quality control is a daunting task. This is where the company's competitiveness lies. Today, we summarize six important quality control issues.

1. Do not arbitrarily clarify the process, and do not change the clearly defined process.

Find LED lens quality issues, problem causes, critical factors or critical performance. Randomly changing the process actually hides the real cause and problem until the problem is understood.

2. Process monitoring must have a strong sense of quantification and traceability

The quality of an LED lens depends on many factors. Don't overlook details. Use data to monitor and record as much detail as possible. Failure to monitor and track process details can lead to misleading corrective and preventive development.

3. Dealing with problems should be patient

Don't be cranky and want to eat a fat man in one go; don't be indifferent when you notice something unusual because it has nothing to do with the problem you're dealing with.

If you don't understand the reason or the law, do nothing. You can monitor and adjust factors that affect your analysis. Review and review some of the experiences and laws that were originally verified and summarized; as long as you find some experiences and laws, and then go deeper and turn them into theory, even if you spend a little more cost, it is worthwhile; you must understand that "the embankment of a thousand miles is destroyed in the ant's nest" , should also understand "The Foolish Old Man Moves the Mountain".

4. To set up preventive thinking

The high level of LED lens quality management is prevention, not how to make up for problems; there should be signs before any quality problems occur, depending on whether you have the methods, methods and experience to monitor and identify; the same quality problems recur repeatedly The second time should arouse great attention;

The process and effect data of each day should be sorted out with tools, and the laws and changing trends should be found from the sorted effects. These laws and displayed trends require continuous correction; before the LED lens, each monitoring element should be as consistent as possible. high.

5. Quality control should have management thinking

Don't hope to directly rely on employees to achieve the stability of the quality of LED lenses; the quality of LED lenses is manufactured, and the direct manufacturers are not managed, and the quality can never be stable; so observe, care and study the performance and conditions of the direct manufacturers of LED lenses , and to manage and adjust for these performances and situations;

If the performance and conditions of the direct manufacturer of the LED lens are not controlled, as long as there is a quality problem, we will always analyze the cause of the error. Do not assume that all general process monitoring requirements of the current process are appropriate. There is no problem with the quality of the LED lens. Therefore, our process monitoring requires continuous improvement while managing people correctly.

6. Listen to more opinions and suggestions

Don't assume that others don't know the real situation and can't deal with the problem right away. Opinions are not worth it. But they, especially the direct manufacturers of LED lenses, can give us a lot of tips and caveats. If you can fix this, you won't hear anyone's opinions or suggestions, but if you can't, you have to listen to other people's opinions and suggestions and try to validate them, like it or not.

The idea of ​​quality control of LED lenses often hits the forefront of science. Even casual words and complaints can guide and suggest the direction of major innovations. Therefore, professional technicians need to pay attention to details and capture details.